The Coat Hook (OBDF110_F2024)

The Coat Hook (OBDF110_F2024)

十月 15, 2024

1. Cat headphones

Function: wall-mounted coat hook (The coat hook is placed in the depression of this object, where the headphones are.)

Form: The object has a perfect aspect ratio and has curved edges, which makes the cat look round and cute. The overall look is fat and thick. The inspiration comes from the fact that every time my cat steps over me, I feel like she weighs as much as a truck.

User Experience: This object needs to be glued to the wall from the back. The coat hook is placed in the depression of this object, where the headphones are. The installation and use functions are simple, and users can understand them easily.

3D Printability: The size should be 5cm x 5cm x 5cm. Eyes, noses, and beards are suspended objects, which are difficult to print. If you want to print them, you need to adjust them.

□ □ □ □ □ □ □ □ □ □ □ □ □ □ □ □ □ □ □ □ □ □ □ □ □ □ □ □ □ □ □ □ □ □ □ □ □ □ □

2. Moon and Clouds

Function: hanging device (The suspension support is placed below the arc above the moon, and the object to be suspended is placed above the cloud.)

Form: The double layer of clouds gives the whole a three-dimensional feel. The whole object is combined to make it look like the shy moon slightly peeking out to look at you. It also feels like it is a dark and windy night with only the moon accompanying you all the time.

User Experience: After the object is disassembled, it can be hung directly somewhere. Easy to move. The suspension support is placed below the arc above the moon, and the object to be suspended is placed above the cloud.

3D Printability: The size should be 6cm (Length) x 2cm (width) x 5cm (height). Laying it flat makes it easier to 3D print.

□ □ □ □ □ □ □ □ □ □ □ □ □ □ □ □ □ □ □ □ □ □ □ □ □ □ □ □ □ □ □ □ □ □ □ □ □ □ □

3. Square hollow object

Function: hanging device (The support frame for hanging this thing passes through the top of the object, and the object you want to put can be placed anywhere on the square hollow object.)

Form: The overall shape is square and the size is consistent, which looks very standard and comfortable.

User Experience: After the object is disassembled, it can be hung directly somewhere. Easy to move. The support frame for hanging this thing passes through the top of the object, and the object you want to put can be placed anywhere on the square hollow object. Some small objects can be placed on it to dry naturally, saving electricity.

3D Printability: The size should be 9cm (Length) x 9cm (width) x 13cm (height). Hard to 3D painting.

□ □ □ □ □ □ □ □ □ □ □ □ □ □ □ □ □ □ □ □ □ □ □ □ □ □ □ □ □ □ □ □ □ □ □ □ □ □ □

4. Gyro hat

Function: wall-mounted coat hook (Stick the back to the wall and place the hooks on the two protrusions.）

Form: Comfortable appearance. Simple drawing, just draw any line I want and then rotate it.

User Experience: This object needs to be glued to the wall from the back, and place the hooks on the two protrusions.

3D Printability: The size should be 4cm (Length) x 5cm (width) x 4cm (height). Hard to 3D painting.

□ □ □ □ □ □ □ □ □ □ □ □ □ □ □ □ □ □ □ □ □ □ □ □ □ □ □ □ □ □ □ □ □ □ □ □ □ □ □

5. Butterfly

Function: wall-mounted coat hook (Stick the back to the wall and place the hooks on the top.

Form: This work gives the impression of a butterfly taking flight and then landing on the wall.

User Experience: This object needs to be glued to the wall from the back, and place the hooks on the top.

3D Printability: The size should be 5cm (Length) x 2.5cm (width) x 5.5cm (height). Hard to 3D painting.

□ □ □ □ □ □ □ □ □ □ □ □ □ □ □ □ □ □ □ □ □ □ □ □ □ □ □ □ □ □ □ □ □ □ □ □ □ □ □

6. Multiple triangles

Function: hanging device (Remove the column of the coat hanger bar and pass it through a closed space of the object.)

User Experience: Remove the column of the coat hanger bar and pass it through a closed space of the object. This object adds storage space for clothes in a cube. Some clothes can be placed in the middle of the object, and some clothes can be placed under the object. And this object can also be used to display necklaces, jewelry and others.

3D Printability: The size should be 10cm (Length) x 10cm (width) x 10cm (height). Hard to 3D painting.

评论